HIKVISION iDS-9000HQHI-M8/S Series - Set a Preset

Figure 3-10 PTZ Parameters Sengs
3.
Edit the PTZ parameters.
Note
All the parameters should be exactly match the PTZ camera parameters.
4.
Click OK to save the sengs.
3.6.2 Set a Preset
Presets record the PTZ posion and the status of zoom, focus, iris, etc. You can call a preset to
quickly move the camera to the
predened posion.
Steps
1.
Click
on the quick sengs toolbar of the PTZ camera's live view.
2.
Click direconal buons to wheel the camera to a locaon.
3.
Adjust the zoom, focus and iris status.
4.
Click in the lower right corner of Live View to set the preset.
Figure 3-11 Set Preset
5.
Select the preset No. (1 to 255) from the drop-down list.
6.
Enter the preset name.
Digital Video Recorder User Manual
35