HIKVISION iDS-9000HQHI-M8/S Series - Configure Auto-Switch of Cameras

Figure 3-2 Live View-General
2.
Congure the live view parameters.
Video Output Interface
Select the video output to
congure.
Live View Mode
Select the display mode for Live View, e.g., 2*2, 1*5, etc.
Dwell Time
The
me in seconds to wait between switching of cameras when using auto-switch in Live
View.
Enable Audio Output
Enable/disable audio output for the selected video output.
Volume
Adjust the Live View volume, playback and two-way audio for the selected output interface.
Event Output
Select the output to show event video.
Full Screen Monitoring Dwell Time
Set the
me in seconds to show alarm event screen.
3.
Click OK.
3.1.2
Congure Auto-Switch of Cameras
You can set the auto-switch of cameras to play in dierent display modes.
Steps
1.
Go to System → Live View → General .
2.
Set Video Output Interface, Live View Mode, and Dwell Time.
Video Output Interface
Digital Video Recorder User Manual
26