HIKVISION iDS-9000HQHI-M8/S Series - Chapter 12 System Management; Configure Device; Configure Time; Manual Time Synchronization

Chapter 12 System Management
12.1 Congure Device
Steps
1.
Go to System → General .
2.
Congure the following sengs.
Language
The default language used is English.
Output Standard
Set the output standard to NTSC or PAL, which must be the same as the video input standard.
Resoluon
Congure video output resoluon.
Device Name
Edit device name.
Device No.
Edit the device serial number. The Device No. can be set in the range of 1 to 255, and the
default No. is 255. The number is used for the remote and keyboard control.
Auto Logout
Set the
meout me for menu inacvity. E.g., when the meout me is set to 5 minutes,
then the system will exit from the current operaon menu to Live View screen aer 5
minutes of menu
inacvity.
Mouse Pointer Speed
Set the speed of the mouse pointer; 4 levels are congurable.
Enable Wizard
Enable/disable the Wizard when the device starts up.
Enable Password
Enable/disable the use of the login password.
3.
Click Apply to save the
sengs.
12.2
Congure Time
12.2.1 Manual Time Synchronizaon
Digital Video Recorder User Manual
135