HIKVISION iDS-9000HQHI-M8/S Series - Configure 5 MP Long Distance Transmission

2.
Set protocol parameters.
Type
The network camera adopng custom protocol must support geng stream through
standard RTSP.
Path
Contact the manufacturer of network camera for the URL (Uniform Resource Locator) of
geng main stream and sub-stream.
Note
The protocol type and the transfer protocol must be supported by the network camera to add.
3.
Click OK.
4.
Click Custom Add to add cameras.
5.
Set the parameters.
6.
Click OK.
1.8
Congure 5 MP Long Distance Transmission
For certain models, you can congure 5 MP long distance transmission.
Steps
1.
Go to Camera → Camera → Analog .
2.
Click to enter the 5 MP Long Distance Transmission Sengs interface.
Figure 1-15 5 MP Long Distance Transmission Sengs
3.
Select channel(s) to enable 5 MP Long Distance Transmission.
4.
Click OK.
5.
Click Apply.
Digital Video Recorder User Manual
15