HIKVISION iDS-9000HQHI-M8/S Series - PIR Alarm

Note
Sensivity range: [1-100]. The higher the value, the more easily the change of scene can trigger
the alarm.
7.
Set the arming schedule.Refer to Congure Arming Schedule .
8.
Set the linkage
acons. Refer to Congure Linkage Acons .
9.
Click Apply.
6.2.6 PIR Alarm
A PIR (Passive Infrared) alarm is triggered when an intruder moves within the detector vision eld.
The heat energy dissipated by a person or any other warm blooded creature such as dogs, cats,
etc., can be detected.
Steps
1.
Go to System → Event → Smart Event .
2.
Click PIR Alarm.
Figure 6-8 PIR Alarm
3.
Select a camera to congure.
4.
Check PIR Alarm.
5.
Oponal: Check Save VCA Picture to save the captured of PIR alarm pictures.
Digital Video Recorder User Manual
90