HIKVISION iDS-9000HQHI-M8/S Series - Activate Via Web Browser

1.1.5 Acvate via Web Browser
You can get access to the recorder via web browser. You may use one of the following listed web
browsers: Internet Explorer 6.0 and above, Apple Safari, Mozilla Firefox, and Google Chrome. The
supported
resoluons include 1024*768 and above.
Before You Start
Ensure you are on the same network segment with your device.
Steps
1.
Enter the IP address in web browser, and then press Enter.
Figure 1-7 Web Browser Acvaon
2.
Set the password for the admin user account.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case leers, lower
case leers, numbers, and special characters) in order to increase the security of your product.
And we recommend you change your password regularly, especially in the high security system,
changing the password monthly or weekly can beer protect your product.
3.
Click OK.
4.
Oponal: Set the security quesons, password recovery email, or export GUID le for password
reseng in the future.
5.
Click OK.
6.
Install the plug-in before viewing the live video and managing the device. You may have to close
the web browser to
nish the installaon of the plug-in.
Digital Video Recorder User Manual
7