HIKVISION iDS-9000HQHI-M8/S Series - Configure Continuous Recording

Figure 4-2 Record Schedule
Note
●
You can repeat the above steps to set schedule recording or capture for each day in the week.
●
Connuous recording is applied to each day by default.
6.
Oponal: Copy the recording schedule to other camera(s).
1) Click Copy to.
2) Select camera(s) to duplicate with the same schedule
sengs.
3) Click OK.
7.
Click Apply.
4.1.5
Congure Connuous Recording
The device can connuously record the video within the congured me schedule.
Steps
1.
Go to Camera → Encoding Parameters → Recording Parameters .
2.
Set the connuous main stream/sub-stream recording parameters for the camera.
3.
Go to Storage → Recording Schedule .
Digital Video Recorder User Manual
47