HIKVISION iDS-9000HQHI-M8/S Series - Configure Redundant Recording and Capture

Figure 4-3 Edit Holiday Sengs
5.
Set Holiday Name, Mode, Start Date, and End Date.
6.
Click OK.
7.
Set the schedule for holiday recording. Refer to
Congure Recording Schedule for details.
4.1.11
Congure Redundant Recording and Capture
Enabling redundant recording and capture, which means saving the record les and captured
pictures not only in the R/W HDD but also in the redundant HDD, will
eecvely enhance the data
safety and reliability.
Before You Start
You must set the storage mode to Group before you set the HDD property to Redundancy. For
detailed
informaon, refer to Congure HDD Group . There should be at least another HDD which
is in Read/Write status.
Steps
1.
Go to Storage → Storage Device .
2.
Select a HDD from the list and click
to enter the Local HDD Sengs interface.
3.
Set the HDD property to Redundancy.
4.
Go to Storage → Schedule
Sengs → Record Schedule/Capture Schedule .
5.
Click Advanced to set the camera recording parameters.
Digital Video Recorder User Manual
50