HIKVISION iDS-9000HQHI-M8/S Series - Chapter 5 Smart Analysis; Task Configuration

Chapter 5 Smart Analysis
Note
The funcons in this secon are only available for certain models.
5.1 Task Conguraon
You can view the task status in task conguraon. Smart analysis results are used for ltering the
pictures when searching interested human body and vehicle pictures.
Before You Start
Check Save VCA Pictures for human body
detecon/vehicle detecon, line crossing detecon,
intrusion detecon, region entrance, or region exing.
Steps
Note
The chapter is only available for certain models of iDS series.
1.
Go to Smart Analysis → Smart Analysis → Task Conguraon .
2.
Check cameras to enable corresponding analysis mode.
3.
Enable auto analysis.
Figure 5-1 Auto Analysis
Digital Video Recorder User Manual
61