HIKVISION iDS-9000HQHI-M8/S Series - View People Counting Statistics; Heat Map

1) Click at the le boom of live view interface.
2) Select channel(s), the checked channel(s) will capture picture. All channels are selected as
default.
3) Click Finish.
5.9 View People Counng Stascs
People counng stascs calculates the number of people entering or leaving a certain congured
area and creates daily/weekly/monthly/annual reports for analysis.
Before You Start
The funcon must be supported by the connected IP camera and the corresponding conguraon
must be set.
Steps
1.
Go to Smart Analysis → Smart Report → Counng via local device GUI.
2.
Select a camera.
3.
Select the report type.
4.
Set Date to analyze. The people
counng graphic will show.
Figure 5-12 People Counng Interface
5.
Oponal: Click Export to export the report in Microso Excel format.
5.10 Heat Map
Heat Map is a graphical representaon of data. The heat map funcon is used to analyze how
many people visited and stayed in a specic area.
Before You Start
The Heat Map funcon must be supported by the connected IP camera and the corresponding
conguraon must be set.
Steps
1.
Go to Smart Analysis → Heat Map .
Digital Video Recorder User Manual
80