HIKVISION iDS-9000HQHI-M8/S Series - Face Picture Library Management

Figure 5-2 Facial Detecon
3.
Select a camera to congure.
4.
Check Enable Face Detecon.
5.
Oponal: Check Save VCA Picture to save the captured pictures of face detecon.
6.
Set the detecon sensivity. Sensivity range: [1-5]. The higher the value is, the more easily the
face will be detected.
7.
Set the arming schedule. Refer to
Congure Arming Schedule
8.
Set linkage acons. Refer to Congure Linkage Acons
9.
Click Apply.
5.3.2 Face Picture Library Management
Face picture library is mainly used for face picture storage and face picture comparison.
Add a Face Picture Library
You can create face picture libraries via local GUI or Hik-Connect app. Here we take the
operaons
on local GUI as an example.
Steps
1.
Go to Smart Analysis → Face Picture Database .
Digital Video Recorder User Manual
63