HIKVISION iDS-9000HQHI-M8/S Series - Configure Image Parameters; Configure Camera Parameters Settings

2.2 Congure Image Parameters
You can customize image parameters, including day/night switch, backlight, contrast, and
saturaon in Camera → Display .
Image Sengs
Customize the image parameters including brightness, contrast, and saturaon.
Exposure
Set the camera exposure me (1/10000 to 1 sec). A larger exposure value results in a brighter
image.
Day/Night Switch
Set the camera to day, night, or auto switch mode according to me or the surrounding
illuminaon condion. When the light diminishes at night, the camera can switches to night
mode with high quality black and white image.
Backlight
Set the camera's wide dynamic range (0 to 100). When the surrounding
illuminaon and the
object have large dierences in brightness, you can set the WDR value to balance the brightness
level of the whole image.
Image Enhancement
For
opmized image contrast enhancement that reduces noise in video stream.
2.3
Congure Camera Parameters Sengs
You can congure the camera parameters, including day/night mode, supplement light mode, etc.
Steps
1.
Go to Camera → Display .
2.
Select a camera as your desire.
3.
Edit name in Camera Name.
4.
Congure the parameters.
Signal Switch
Switch the 4 MP or 5 MP signal from Signal Switch. 4 MP 25/30 fps and 5 MP 20 fps are
selectable. The 4 MP 25 fps and 4 MP 30 fps signals are
self-adapve for the camera.
Enable Defog
Check Enable Defogto enable the defog funcon of the selected camera. And set the Defog
Levelfrom 1 to 4.
Day to Night
Sensivity/Night to Day Sensivity
Digital Video Recorder User Manual
20