HIKVISION iDS-9000HQHI-M8/S Series - Set a Pattern

Figure 3-18 Patrol Conguraon
3.
Select a patrol.
4.
Click Call to start the patrol.
5.
Oponal: Click Stop to stop the patrol.
3.6.6 Set a
Paern
Paerns can be set by recording the movement of the PTZ. You can call the paern to make the
PTZ move according to the predened path.
Steps
1.
Click on the quick sengs toolbar of the PTZ camera's live view.
2.
Click
Paern to congure a paern.
Figure 3-19 Paern Conguraon
3.
Select the paern No.
4.
Set the
paern.
1) Click Record to start recording.
2) Click corresponding
buons on the control panel to move the PTZ camera.
3) Click Stop to stop recording. The PTZ movement is recorded as the paern.
Digital Video Recorder User Manual
39