HIKVISION iDS-9000HQHI-M8/S Series - Configure ISUP

Figure 1-16 Download Hik-Connect
2) Use Hik-Connect to scan the device QR, and bind the device.
Note
If the device is already bound with an account, you can click Unbind to unbind with the
current account.
5.
Click Apply.
What to do next
You can access your video recorder via Hik-Connect.
1.9.2
Congure ISUP
SDK is based on Intelligent Security Uplink Protocol (ISUP). It provides APIs, library les, and
commands for the third-party
plaorm to access devices such as NVRs, speed domes, DVRs,
network cameras, mobile NVRs, mobile devices, decoding devices, etc. With this protocol, the
third-party
plaorm can realize funcons like live view, playback, two-way audio, PTZ control, etc.
Steps
Note
This funcon is only available for certain models.
1.
Go to System → Network → Advanced → Plaorm Access .
Digital Video Recorder User Manual
17