HIKVISION iDS-9000HQHI-M8/S Series - Page 42

Figure 1-17 ISUP Sengs
2.
Select Access Type as ISUP.
3.
Check Enable.
Note
Enabling ISUP will disable other plaorm access.
4.
Set the related parameters.
Server Address
The
plaorm server IP address.
Server Port
The plaorm server port, ranges from 1024 to 65535. The actual port shall be provided by
the plaorm.
Device ID
Device ID shall be provided by the plaorm.
Version
ISUP protocol version, only V5.0 is available.
Encrypon Password
Encrypon password is required when using ISUP V5.0 version, it provides more secure
communicaon between the device and plaorm. Enter it for vericaon aer the device is
registered to the ISUP plaorm. It cannot be empty, or "ABCDEF".
5.
Click Apply to save the
sengs and restart the device.
What to do next
You can see the registraon status (online or oine) aer the device is restarted.
Digital Video Recorder User Manual
18