HIKVISION iDS-9000HQHI-M8/S Series - Page 110

Figure 6-4 Object Removal Detecon
3.
Select a camera to congure.
4.
Check Enable Object Removable Detecon.
5.
Oponal: Check Save VCA Picture to save the captured object removable detecon pictures.
6.
Follow these steps to set the detecon rules and detecon areas.
1) Select Arming Region. Up to 4 regions are selectable.
2) Drag the sliders to set Time Threshold and
Sensivity.
Time Threshold
The me of the objects removed from the region. If the value is 10, alarm will be triggered
aer the object disappears from the region for 10s. Its range is [5s-20s].
Sensivity
The similarity degree of the background image. If the sensivity is high, a very small object
taken from the region will trigger the alarm.
3) Click Draw Area and draw a quadrilateral in the preview window by specifying four
verces of
the detecon region.
7.
Set the arming schedule.Refer to
Congure Arming Schedule .
8.
Set the linkage acons. Refer to Congure Linkage Acons .
9.
Click Apply.
Digital Video Recorder User Manual
86