HIKVISION iDS-9000HQHI-M8/S Series - Page 140

Figure 10-4 Connect to a Wireless Network
2.
Check Enable Wi-Fi.
3.
Connect to a wireless network.
Connect to an
Automacally
Searched Wireless Network
a. Double click the wireless network from the list as
you desired.
b. Set wireless network parameters.
c. Click OK.
Connect to a Customized Wireless
Network
a. Click Custom Adding.
b. Set wireless network parameters.
c. Click OK.
Connect to a Wireless Network with
WPS (Wi-Fi Protected Setup)
a. Click WPS Sengs.
b. Check Enable WPS.
c. Set wireless network parameters.
d. Click Apply.
Aer connecng to an available wireless network, you can view the connecon result in
Connecon Status.
4.
Go to System → Network → TCP/IP → TCP/IP .
5.
Set Select NIC and Default Route as WLAN0.
6.
Set other network parameters.
7.
Click Apply.
Digital Video Recorder User Manual
116