Hioki 8807-01 - 7.5 Scaling Function

131
_____________________________________________________________________
7.5 Scaling Function
______________________________________________________________
Flashing cursor
Flashing cursor
Ratio
Use conversion ratio method
2 Point
Use 2-point method
Procedure
Scaling Screen
(1) Display the Scaling Screen.
1. Press the
SET
button to display the Channel Screen.
2. Move the flashing cursor to
Scaling
... and use the
buttons to display the Scaling Screen.
(2) Select the scaling method.
Move the flashing cursor as shown in the figure below and
select the scaling method using the buttons to make a
setting.