Hioki 8807-01 - Page 329

APPENDIX 3
______________________________________________________________________
Appendix 1 Messages
________________________________________________________________
16
2
3
4
5
6
7
8
9
10
11
12
13
14
15
APPX
IND
620 Battery low. Recharge or change the batteries.
621 Battery low (Printer) Battery voltage is low.
631 Range changed.(Out of
range)
The range was changed with the Auto Range
function during measurement.
632 Input too large. The input value exceeded the measurement
range.
633 Set
CH1=Volt,CH2=Current. Measurement may not be possible under some
measurement conditions.
(For 8807-51, 8808-51 only.)
For details, see page 20 of the Harmonic Wave
Analysis Functions manual supplied with the
8807-51 and 8808-51.
634 Set
CH1,3=Volt,CH2,4=Current.
635 3283,3284,3285 can't
analyze power.
636 Don't analyze power.