Hioki 8807-01 - Appendix 2 Reference; Sampling

APPENDIX 4
______________________________________________________________________
Appendix 2 Reference
________________________________________________________________
Sampling period
Measurement point
Appendix 2 Reference
Sampling
The product converts the input signal to a digital value, then
carries out all internal processing digitally. This process of
converting an analog signal to digital values is termed
sampling.
Sampling measures the magnitude of the signal at fixed time
intervals (sampling periods).
The rate of taking these measurements is termed the
sampling rate.
The units are S/s, read as samples per second.
This is the reciprocal of the sampling period (1/T).