APPENDIX 14
______________________________________________________________________
Appendix 3 WaveViewer (Wv)
________________________________________________________________
Appendix 3.3 Using the Waveform Viewer
Waveform display
To display a waveform it is first necessary to select the file
to be displayed.
In the [
File
] menu, select [
Open
], to display the file
selection dialog box.
Select a waveform file, and click Open to read in the file,
and display the waveform.
Changing the time axis scale (zoom function)
You can change the time axis scale in the display using the
menus or toolbar.
In the toolbar, click the [
Set Magnification
] box, to display
the possible zoom factors: you can then select any desired
value.
To Next Page
Loading...
