APPENDIX 15
______________________________________________________________________
Appendix 3 WaveViewer (Wv)
________________________________________________________________
Changing waveform scale and position (Waveform
Control Panel)
You can adjust the display for each channel separately. In
the [
View
] menu, select [
Wave Control Panel
] to display a
dialog box.
CH
This indicate the list of channel. When a check
mark is present the corresponding channel is
displayed.
Zoom
Set the magnification on the voltage axis for the
specified channel.
Posn
Set the position of the specified channel.
Show
Display the specified channel(s).
Hide
Do not display the specified channel(s).
Show All
Display all channels.
Hide All
Do not display all channels.
Color
Change the color of the specified channel(s).
Default
Set all values of the specified channel(s) to their
default values.
Close
Close the Waveform Control Panel.
To Next Page
Loading...
