13.1 MR8880-20 Specifications
232
Accessories sold separately
Standard options
• Model Z1002 AC Adapter (12 V DC, 5.25 A)
• Model MR9000 Printer Unit (for Model MR8880-20)
• Model Z1000 Battery Pack (NiMH, 7.2 V, 4500 mAh)
• Model C1003 Carrying Case (with space for storing options)
• Model 9234 Recording Paper (112 mm wide, 18 m roll)
• Model Z4006 USB Drive (16GB)
• Model 9727 PC Card (256MB)
• Model 9728 PC Card (512MB)
• Model 9729 PC Card (1GB)
• Model 9830 PC Card (2GB)
Measurement
probes, etc.
• Model L9197 Connection Cord (Maximum input voltage 600 V
AC/DC, Isolated BNC, Alligator Clip)
• Model 9197 Connection Cord (Maximum input voltage 600 V AC/
DC, Isolated BNC, Alligator Clip)
• Model L9198 Connection Cord (Maximum input voltage 300 V
AC/DC, Isolated BNC, Alligator Clip)
• Model 9199 Conversion Adaptor (Isolated BNC, Banana jack
with rigid insulating sleeve)
• Model L9217 Connection Cord (Maximum input voltage 300 V
AC/DC, Isolated BNC-BNC)
• Model L9790 Connection Cord (Maximum input voltage 600 V
AC/DC, Isolated BNC, Banana Plug with rigid insulating sleeve)
• Model L9790-01 Alligator Clip (for Model L9790)
• Model 9790-02 Grabber Clip (for Model L9790)
• Model 9790-03 Contact Pin (for Model L9790)
• Model 9322 Differential Probe
• Model 9418-15 AC Adapter (for Model 9322)
Logic probes
• Model 9320-01 Logic Probe (Four channels, for detecting volt-
age and closed/open contact points)
• Model MR9321-01 Logic Probe (Four isolated channels, for
detecting AC/DC voltage on/off)
• Model 9323 Conversion Cable (for connecting Model 9320 or
9321)
Current measure-
ment probes, etc.
• Model 9018-50 Clamp-On Probe
(10 A to 500A AC, 40 Hz to 3 kHz)
• Model 9132-50 Clamp-On Probe
(10 A to 500A AC, 40 Hz to 1 kHz)
• Model 9675 Clamp-On Leak Sensor
(10 A AC, 40 Hz to 5 kHz)
• Model 9657-10 Clamp-On Leak Sensor
(10 A AC, 40 Hz to 5 kHz)
PC application
program
• Model 9335 Wave Processor (PC application programs)
To Next Page
Loading...
Need help?
General
