Hioki PW3390 - Chapter 7 Data Saving and File Operations

5.7 Trend Function
125
5
Chapter 5 Operating Functions
Move the cursor left or right with the key or key, respectively.
Changing the sign
Change the sign of the entered val-
ue with the key.
Select the [+/-]
Move the input cursor
The input cursor only appears at value digits. It will skip the decimal point.
Selecting the unit prefix
Values shown on the trend graph are displayed after being adjusted for the appropriate deci-
mal point position and unit prefix. Consequently, the decimal point positions and prefixes for
values shown on the trend graph and entered values may not agree.
Select the unit prefix with the F
key.
Prefixes:
T, G, M, k, None, m, u, n
Prefix