Hioki RM3542 - Page 10

Verifying Package Contents
4
Options
Contact your dealer or Hioki representative for details.
Measurement Probes and Fixtures
(connect to measurement jacks)
 Model 9140 4-terminal Probe
 Model 9262 Test Fixture
 Model 9263 SMD Test Fixture
Alligator-clip-type measurement
probes. These general-purpose
dual-electrode clips fit a wide
range of conductor thicknesses.
This fixture is for measuring lead
components. (less than 10 m
residual resistance after zero
adjustment)
This fixture is for measuring chip
components. (less than 10 m
residual resistance after zero
adjustment)
Interface Cables
 Model 9637 RS-232C Cable
(9-pin to 9-pin/ crossover cable)
 Model 9638 RS-232C Cable
(9-pin to 25-pin/ crossover cable)
 Model 9151-02 GP-IB Connector Cable (2m)