9.6 Message List
116
Commands specific to RS-232C or GP-IB are identified by or , respectively.
9.6 Message List
Standard Commands
Message Data Formats Description
Ref
page
CLS
Clears the event registers and the Status Byte Register. 124
ESE
0 to 255
Sets the contents of the Standard Event Status Enable Register. 125
ESE?
[0 to 255]
Queries the Standard Event Status Enable Register. 125
ESR?
[0 to 255]
Queries the Standard Event Status Register. 125
IDN?
[<Manufacturer's name>,<Model
name>,0,<Software version>]
Queries the Device ID. 123
OPC
Requests an SRQ after execution completion. 124
OPC?
1
Queries execution completion. 124
RST
Initializes the device. 123
SRE
0 to 255
Sets the Service Request Enable Register. 126
SRE?
[0 to 255]
Queries the contents of the
Service Request Enable Register
.126
STB?
[0 to 255]
Queries the Status Byte Register. 126
TRG
Executes one sampling. 126
TST?
[0 to 7]
Initiates a self-test and queries the result. 123
WAI
Wait for operations to finish. 124
Notes:
• < >: contents of the data portion.
• [ ]: Response data
To Next Page
Loading...
