M4 x 6 mm
M4 x 10 mm
Spacers
Rack Mounting Plate (EIA)
Rack Mounting Plate (JIS)
Spacers
M4 x 10 mm
M3 x 6 mm
1Remove the feed from the bottom of the
instrument, and the screws from the
sides (four near the front).
2Installing the spacers on both sides of
the instrument, affix the Rack Mounting
Plate with the M4 x 10 mm screws.
When installing into the rack, reinforce the in-
stallation with a commercially available sup-
port stand.
To Next Page
Loading...
