Figure 4-39 Editing local time
To edit Time Zone;
1. Select Administration tab on the web console and select Date and
Time.
2. Select Time Zone tab and then click Edit.
3. The dialog box for edit appears. Input time zone in your environment.
4. Click Confirm.
5. The confirmation dialog box appears. Click OK.
Figure 4-40 Editing time zone
To edit NTP;
1. Select Administration tab on the web console and select Date and
Time.
2. Select NTP tab and then click Edit.
3. The dialog box for edit appears. Input NTP in your environment.
4. Click Confirm.
5. The confirmation dialog box appears. Click OK.
4-46
Common process for replacement
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
