Hitachi CB 520H A1 Service Manual

10. Close the test program. See "Closing the test program on page 8-14"
section.
11. Restart BMC. See "Restarting BMC procedure on page 4-56" section.
Diagnosing server blade.
You need to set server blade power value and check blade configuration after
changing LOM configuration. See "Chapter 8, Diagnosing server blade".
Change LOM configuration
10-17
Hitachi Compute Blade 500 Series System Service Manual

Hitachi CB 520H A1 Specifications

General

Brand	Hitachi
Model	CB 520H A1
Category	Server
Language	English