Hitachi CB 520H A1 - Page 136

To edit TOD;
1. [For CB 520A A1, CB 520H A1/B1/B2/B3/B4, CB 540A A1/B1, and Non-
SMP CB 520X B1/B2/B3]
Select Resources tab on the web console and select Modules > All
Modules > Server Blades > a target module that should set up TOD.
[For SMP CB 520X B1/B2/B3]
Select Resources tab and select Modules > All Modules > Server
Blades > Sever Blade n of the SMP configuration > a target
module that should set up TOD.
2. Select BMC tab.
3. Click Edit, and select BMC time.
4. The dialog box for editing appears. Input local time in your environment.
5. Click Confirm.
6. The confirmation dialog box appears. Click OK.
Figure 4-43 Editing local time
4-48
Common process for replacement
Hitachi Compute Blade 500 Series System Service Manual