7. Enter show version, and then press Enter key.
8. Confirm the time and date in the Date line.
To edit TOD;
1. Enter set clock < yymmddhhmm.ss >, and then press Enter key.
yy/mm/dd/hh/mm/ss :year/month/ day/ hour/ minute/ second
Tip: All type of LAN switch modules automatically download the time and
date information from one of the management module and reconfigure to the
latest time and date whenever the LAN switch modules are power on.
Basically, you do not need to edit the time and date of the LAN switch module
directly.
8Gb FC switch module / 16Gb FC switch module / 10Gb DCB switch module
To identify TOD;
1. Click Start > Programs > Accessories > Communications >
HyperTerminal to boot up terminal software.
2. The Connection Description window is displayed. Enter telnet1, and
then click OK.
3. Select TCP/IP (Winsock), enter < IP address > in the Host address
box, and then click OK.
< IP address >:IP address for the target switch module. See Internal IP
address setup procedure for switch module on page 4-18 section.
4. The login prompt is displayed in the terminal.
4-50
Common process for replacement
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
