8. Select Add Boot Device in Emulex Adapter Configuration Main Menu
window by using ↓ and ↑ keys, and then press Enter.
9. Select 0001: HITACHI DF600F 0000 line by using ↓ and ↑ keys, and
then press Enter.
Confirm that the alphanumeric in the upper right WWN line is as same as
the one of failed mezzanine card, write down the WWN line into the
following table, and then press Enter.
(Note: The indication of HITACHI DF600F 0000 portion varies
depending on the connected peripheral device.)
Configuring Emulex mezzanine card
7-35
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
