18. Enter 1 in Select No. line of Emulex CNA Utility dialog box, and then
press Enter.
Confirm whether the FW ver column for the replaced CNA mezzanine
card is correctly updated.
19. Enter q in Select No. line of Emulex CNA Utility dialog box, and then
press Enter.
20. Remove the check in Mapped check box in Client View pane of Virtual
Media Session window.
21. Remove the CD-ROM from the console PC.
Move cursor onto Power Off, and then press Enter.
Configuring Emulex mezzanine card
7-79
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
