20. Click Power > Forced Power Off in the remote console menu bar to
power on the target server blade.
Click Yes in Power Control dialog box.
End of "Restoring FCoE settings".
When the server model is CB 520X B1/B2/B3 and CB 520H B2/B3/B4, go to
Restoring backed up CNA information on page 7-104.
When the firmware version of management module is A0180 or later, and the
firmware version of server blade is as follows, go to
Restoring backed up CNA
information on page 7-104.
Server model Firmware version
CB 520H A1/B1 01-70 or later
CB 520A A1 02-38 or later
Configuring Emulex mezzanine card
7-103
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
