Figure 8-7 EFI date and time setup
6. Select Boot Manager in System Configuration and Boot
management window, and then press Enter key.
7. Select Boot From Device in Boot Manager window, and then press
Enter key.
Figure 8-8 Selecting Boot from Device
8. When no check mark exists in a field enclosed by square brackets of
Legacy Only, select the field, and then press Enter key.
Select xxx:CD/DVD - xxx:Remote Mount in Boot Devices Manager
window, and then press Enter key.
Diagnosing server blade
8-9
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
