Hitachi Compute Blade 500 Series - Page 175

Tip: If the boot mode is UEFI mode, you do not need to add an HBA
device because the device is automatically added to the boot order when
the OS is installed.
10. Change the boot order using Move selection up and Move selection down
as follows, and click Confirm.
When the boot mode is Legacy mode:
¢
LU
¢
CD/DVD-KVM
¢
EFI-SHELL
When the boot mode is UEFI mode:
¢
CD/DVD-KVM
¢
EFI-SHELL
Functional detail
2-151
Hitachi Compute Blade 500 Series Management Module Setup Guide