Hitachi Compute Blade 500 Series - Page 255

DCMI command NetFn CMD
Min Privilege
level
Support of
CB 500
Set Watchdog Timer App (06h) 24h Operator Y
Get Channel Authentication
Capabilities
App (06h) 38h None Y
Set Session Privilege Level App (06h) 3Bh User Y
Close Session App (06h) 3Ch User Y
Get Session Info App (06h) 3Dh User Y
Get Payload Activation
Status
App (06h) 4Ah User Y
Get Payload Instance Info App (06h) 4Bh User Y
Get Channel Payload
Support
App (06h) 4Eh User Y
Activate Payload App (06h) 48h Configurable Y
Deactivate Payload App (06h) 49h Configurable Y
Get Channel Cipher Suites App (06h) 54h None Y
SOL Activating Transport (20h) 20h None Y
Set LAN Configuration
Parameters
Transport (0Ch) 01h Admin Y
Get LAN Configuration
Parameters
Transport (0Ch) 02h Operator Y
Set Channel Access App (06h) 40h Admin Y
Get Channel Access App (06h) 41h User Y
Get Channel Info App (06h) 42h User Y
Set User Access App (06h) 43h Admin Y
Get User Access App (06h) 44h Operator Y
Set User Name App (06h) 45h Admin Y
Get User Name App (06h) 46h Operator Y
Set User Password App (06h) 47h Admin Y
Set User Payload Access App (06h) 4Ch Admin Y
Get User Payload Access App (06h) 4Dh Operator Y
Set SOL Configuration
Parameters
Transport (0Ch) 21h Admin Y
Get SOL Configuration
Parameters
Transport (0Ch) 22h User Y
Set BMC Global Enables App (06h) 2Eh system interface Y
Get BMC Global Enables App (06h) 2Fh system interface,
User
Y
Functional detail
2-231
Hitachi Compute Blade 500 Series Management Module Setup Guide