Hitachi Compute Blade 500 Series - Page 300

ID
Operation
category
Recording trigger Message
388E Changing JP1/SC/BSM
connection settings.
JP1/SC/BSM connection setting is
changed. Channel:xxx Server:xxx
3890 Creating E-mail setting. E-mail setting is created.
Channel:xxx
3891 Changing E-mail
setting.
E-mail setting is changed.
Channel:xxx
3892 Removing E-mail
setting.
E-mail setting is removed.
Channel:xxx
3898 Changing switch
module settings.
On Switch module N, setting is
changed. Channel:xxx Category:xxx
Detail:xxx Value:xxx
3899 Changing switch
module settings.
On Switch module N, setting is
changed. Channel:xxx Port#:xxx
Category:xxx Detail:xxx Value:xxx
389A Changing password
settings for LCD touch
panel.
LCD touch console password is
changed. Channel:xxx
389B Initializing password
settings for LCD touch
panel.
LCD touch console password is
initialized. Channel:xxx
389D Clearing server blade
host information
Host information on the server
blade n has been cleared.
Channel:xxx
3900 Changing HCSM
settings with HCSM
command
HCSM setting is changed.
Means: %2$s; Type: %3$s;
Changes: %4$s; After changed:
%5$s
3901 Adding HCSM server
settings with HCSM
command
HCSM management server setting is
added.
Means: %2$s; IP address: %3$s;
Alert port number: %4$s; Alert
level: %5$s; Retry interval: %6$s;
Retry duration: %7$s
3902 Changing HCSM server
settings with HCSM
command
HCSM management server setting is
changed.
Means: %2$s; IP address: %3$s;
Type: %4$s; Before changed:
%5$s; After changed: %6$s
3903 Changing HCSM server
settings with HCSM
command
HCSM management server setting is
changed.
Means: %2$s; IP address: %3$s;
Changes: %4$s; After changed:
%5$s
2-276
Functional detail
Hitachi Compute Blade 500 Series Management Module Setup Guide