Hitachi Compute Blade 500 Series - Page 301

ID
Operation
category
Recording trigger Message
3904 Deleting HCSM server
settings with HCSM
command
HCSM management server setting is
deleted.
Means: %2$s; IP address: %3$s
3905 Disconnecting HCSM
server session with
HCSM command
HCSM management server is
disconnected.
Means: %2$s; IP address: %3$s
3910 Changing security
strength configuration
for management
modules
On Management module, security
configuration is changed.
Channel:xxx Detail:xxx Value:xxx
3911 Changing security
strength configuration
for server blades
On Server Blade N, security
configuration is changed.
Channel:xxx Detail:xxx Value:xxx
3912 Changing TLS/SSL
versions for
management modules
On Management module, TLS/SSL
version is changed. Channel:xxx
Detail:xxx Value:xxx
3913 Changing Syslog
transfer settings
Syslog transfer setting is changed.
Channel:xxx Detail:xxx Value:xxx
391A Changing the login
banner settings
Changing the login banner settings
The login banner settings were
changed. Channel: xxx Value: xxx
391B Registering a login
banner message
The login banner message was
registered. Channel: xxx
391C Changing the login
banner message
The login banner message was
changed. Channel: xxx
391D Deleting the login
banner message
The login banner message was
deleted. Channel: xxx
391E Changing the Web
console (management
LAN) settings
The Web console (management
LAN) settings were changed.
Channel: xxx Value: xxx
391F Changing the Web
console (maintenance
LAN) settings
The Web console (maintenance
LAN) settings were changed.
Channel: xxx Value: xxx
392B Change to the password
policy settings
Password policy setting is changed.
Channel:xxx Category:xxx
Detail:xxx Value:xxx
392C Change to the BMC user
account settings
BMC user account setting is
changed. Channel:xxx
ServerBlade:xxx Account:xxx
Use:xxx Name:xxx
392D Change to the IPMI user
account settings
IPMI user account setting is
changed. Channel:xxx
ServerBlade:xxx Account:xxx
Use:xxx Name:xxx Role:xxx
Functional detail
2-277
Hitachi Compute Blade 500 Series Management Module Setup Guide