Hitachi Compute Blade 500 Series Management Module Setup Guide

ID
Operation
category
Recording trigger Message
392E Change to the USB
(Front panel) settings
USB setting is changed.
Channel:xxx Category:xxx
Detail:xxx Value:xxx
392F Change to the
authentication
encryption setting
Authenticated encryption setting is
changed. Channel:xxx Value:xxx
3930 Change to the Server
blade settings
On Server blade N, setting is
changed. Channel:xxx Category:xxx
Assign:xxx Redundancy:xxx
3931 Change to the RADIUS
settings
Setting of RADIUS was changed.
Channel:xxx Category:xxx
Detail:xxx Value:xxx
3932 Change to the RADIUS
server settings
Setting of RADIUS serverN was
changed. Channel:xxx Category:xxx
Detail:xxx Value:xxx
393A Change to the
Management module -
LP communication
setting
Management module - LP
communication setting was
changed. Channel:xxx Category:xxx
Detail:xxx Value:xxx
393B Changing server blade
settings.
On Server blade N, setting is
changed. Channel:xxx Category:xxx
Detail:xxx Value:xxx
393C Changing server blade
settings.
On Server blade N, setting is
changed. Channel:xxx Category:xxx
Detail:xxx Value:xxx
393D Changing server blade
settings.
On Server blade N, setting is
changed. Channel:xxx Category:xxx
Detail:xxx Value:xxx
8800 Maintenance Shifting normal mode to
maintenance mode for
server chassis.
On Server chassis, changed into
maintenance mode from normal
mode. Channel:xxx
8801 Shifting maintenance
mode to normal mode
for server chassis.
On Server chassis, changed into
normal mode from maintenance
mode. Channel:xxx
8802 Shifting normal mode to
maintenance mode for
server blade.
On Server blade N, changed into
maintenance mode from normal
mode. Channel:xxx
8803 Shifting maintenance
mode to normal mode
for server blade.
On Server blade N, changed into
normal mode from maintenance
mode. Channel:xxx
8804 Shifting normal mode to
maintenance mode for
switch module.
On Switch module N, changed into
maintenance mode from normal
mode. Channel:xxx
8805 Shifting maintenance
mode to normal mode
for switch module.
On Switch module N, changed into
normal mode from maintenance
mode. Channel:xxx
2-278
Functional detail
Hitachi Compute Blade 500 Series Management Module Setup Guide

Hitachi Compute Blade 500 Series Specifications

General

Brand	Hitachi
Model	Compute Blade 500 Series
Category	Server
Language	English