Hitachi Compute Blade 500 Series - Page 320

3. Click Systems > Firmware.
4. Select a target server blade to update. With the server blade selected,
click Update Server Blade firmware.
Tip:
•
To select multiple server blades, press and hold Ctrl key and click a
server blade.
• Selecting a server blade highlights the row in blue.
• In SMP configuration, select the primary server blade to update all
server blades simultaneously in the configuration.
5. Click Browse
and select an update file.
Tip: When opening a file, follow the OS procedure.
6. Click Confirm.
7. Check that the selected update file is shown for Server Blade Firmware
and all target server blades are shown for Server Blade, and click OK.
2-296
Functional detail
Hitachi Compute Blade 500 Series Management Module Setup Guide