ID Level Message
Description
FDA9 Info Power supply is powered off.(Location:X)
[Meaning] A power supply module at the part shown in X is powered off.
[Action] No particular action required.
FDAB FAIL Power supply failed to power-on.
(Location:X)
[Meaning] A power supply module at the part shown in X is failed to power-on.
[Action] Consult your reseller or maintenance personnel.
FDAC WARNING Power supply failed to power-off.
(Location:X)
[Meaning] A power supply module at the part shown in X is failed to power-off.
[Action] Consult your reseller or maintenance personnel.
FDAE Info Management module is powered on.
(Location:X)
[Meaning] A management module at the part shown in X is powered on.
[Action] No particular action required.
FDAF Info Management module is powered off.
(Location:X)
[Meaning] A management module at the part shown in X is powered off.
[Action] No particular action required.
FDBA Info Panel button was pressed, and NMI was
issued.(Location:X)
[Meaning] In a server blade at the part shown in X, NMI is issued.
[Action] No particular action required.
FDBB Info NMI was issued.(Location:X)
[Meaning] In a server blade at the part shown in X, NMI is issued.
[Action] No particular action required.
FDC0 Info Time is updated.(Location:X)
[Meaning] Time of module at the part shown in X is changed.
[Action] No particular action required.
FDC8 Info Updating firmware has started.
(Location:X)
[Meaning] In a server blade at the part shown in X, firmware update has started.
[Action] No particular action required.
FDC9 Info Updating firmware has completed.
(Location:X)
[Meaning] In a server blade at the part shown in X, firmware update has completed.
[Action] No particular action required.
HCSM alert log message
A-9
Hitachi Compute Blade 500 Series Management Module Setup Guide
To Next Page
Loading...
