ID Level Message
Description
[Action] No particular action required.
FD85 WARNING On server, power-on is inhibited.
(Location:X)
[Meaning] Power of server blade at the part shown in X is inhibited. The problem may be
caused by following reasons:
Construction and setting have problem. (Combination of hardware is invalid/power
shortage)
Working state of maintenance. (Power operation for maintenance module/failure
module)
[Action] Eliminate the course of inhibition. If you cannot find course, consult your
reseller or maintenance personnel.
FD90 Info Server is powered on.(Location:X)
[Meaning] A server blade at the part shown in X is powered on.
[Action] No particular action required.
FD91 Info Server is powered off.(Location:X)
[Meaning] A server blade at the part shown in X is powered off.
[Action] No particular action required.
FD92 Info Server is reset.(Location:X)
[Meaning] A server blade at the part shown in X is reset.
[Action] No particular action required.
FD93 FAIL Server failed to power-on.(Location:X)
[Meaning] A server blade at the part shown in X is failed to power-on.
[Action] Consult your reseller or maintenance personnel.
FD9C Info Switch module is powered on.
(Location:X)
[Meaning] A switch module at the part shown in X is powered on.
[Action] No particular action required.
FD9D Info Switch module is powered off.
(Location:X)
[Meaning] A switch module at the part shown in X is powered off.
[Action] No particular action required.
FD9F FAIL Switch module failed to power-on.
(Location:X)
[Meaning] A switch module at the part shown in X is failed to power-on.
[Action] Consult your reseller or maintenance personnel.
FDA8 Info Power supply is powered on.(Location:X)
[Meaning] A power supply module at the part shown in X is powered on.
[Action] No particular action required.
A-8
HCSM alert log message
Hitachi Compute Blade 500 Series Management Module Setup Guide
To Next Page
Loading...
