ID Level Message
Description
[Meaning] The AC input error is corrected. X shows the part that error occurred.
[Action] No particular action required.
FD68 FAIL Uncorrectable CPU error occurred.
(Location:X)
[Meaning] Uncorrectable CPU error is occurred. X shows the part that error occurred.
[Action] Consult your reseller or maintenance personnel.
FD69 WARNING Corrected CPU error threshold exceeded.
(Location:X)
[Meaning] Although uncorrectable CPU error is corrected, corrected CPU error threshold
is exceeded. X shows the part that error occurred.
[Action] Although the device can keep running, fault may be occurred. Consult your
reseller or maintenance personnel.
FD6B FAIL Uncorrectable memory error occurred.
(Location:X)
[Meaning] Uncorrectable memory error is occurred. X shows the part that error occurred.
[Action] Consult your reseller or maintenance personnel.
FD6C WARNING Corrected memory error threshold
exceeded.(Location:X)
[Meaning] Although uncorrectable memory error is corrected, corrected CPU error
threshold is exceeded. X shows the part that error occurred.
[Action] Although the device can keep running, fault may be occurred. Consult your
reseller or maintenance personnel.
FD70 WARNING CPU is disabled.(Location:X)
[Meaning] CPU at the part shown in X is degraded.
[Action] Although the device can keep running, CPU performance is degraded. Consult
your reseller or maintenance personnel.
FD71 WARNING Memory is disabled.(Location:X)
[Meaning] Memory at the part shown in X is degraded.
[Action] Although the device can keep running, memory performance is degraded.
Consult your reseller or maintenance personnel.
FD78 WARNING Module lacks redundancy.(Location:X)
[Meaning] A module at the part shown in X has no longer redundancy.
[Action] Although the device can keep running, redundancy is lost. Consult your reseller
or maintenance personnel.
FD79 Info Module restored redundancy.
(Location:X)
[Meaning] A module at the part shown in X has redundancy.
[Action] No particular action required.
FD7F FAIL Event is logged.(Location:X,Event:Y)
[Meaning] Event at the part shown in X is logged. Y shows the event type.
HCSM alert log message
A-7
Hitachi Compute Blade 500 Series Management Module Setup Guide
To Next Page
Loading...
