ID Level Message
Description
[Meaning] A warning event in the management module at the part shown in X is
occurred. Y shows the event type.
[Action] Consult your reseller or maintenance personnel.
FD53 FAIL On management module, an error event
occurred.(Location:X,Event:Y)
[Meaning] An error event in the management module at the part shown in X is occurred.
Y shows the event type.
[Action] Consult your reseller or maintenance personnel.
FD54 Info Management module has been restored
to a normal level.(Location:X,Event:Y)
[Meaning] The management module at the part shown in X is back to the normal level. Y
shows the event type.
[Action] No particular action required.
FD58 WARNING On other module, a warning event
occurred.(Location:X,Event:Y)
[Meaning] A warning event in other module (except server blade, power supply module,
fan module, switch module, disk, and management module) at the part shown in X is
occurred. Y shows the event type.
[Action] Consult your reseller or maintenance personnel.
FD59 FAIL On other module, an error event
occurred.(Location:X,Event:Y)
[Meaning] An error event in other module (except server blade, power supply module,
fan module, switch module, disk, and management module) at the part shown in X is
occurred. Y shows the event type.
[Action] Consult your reseller or maintenance personnel.
FD60 WARNING The cooling fan rotation speed is
abnormally high or low.(Location:X)
[Meaning] The cooling fan rotation speed is abnormally high or low. X shows the part
that event occurred.
[Action] Consult your reseller or maintenance personnel.
FD61 Info The cooling fan rotation speed has been
restored a normal level.(Location:X)
[Meaning] The cooling rotation speed is restored the normal level. X shows the part that
event occurred.
[Action] No particular action required.
FD64 WARNING On chassis, an AC input is lost.
(Location:X)
[Meaning] An AC input is lost in the power supply module at the part shown in X.
[Action] Check if something wrong is in the power supply to devices. If nothing wrong is
detected, consult your reseller or maintenance personnel.
FD65 Info On chassis, the AC input error has been
corrected.(Location:X)
A-6
HCSM alert log message
Hitachi Compute Blade 500 Series Management Module Setup Guide
To Next Page
Loading...
