Hitachi Compute Blade 500 Series - Page 349

ID Level Message
Description
[Meaning] The power supply module at the part shown in X is back to the normal level. Y
shows the event type.
[Action] No particular action required.
FD4A FAIL On cooling fan, an error event occurred.
(Location:X,Event:Y)
[Meaning] An error event in the cooling fan module at the part shown in X is occurred. Y
shows the event type.
[Action] Consult your reseller or maintenance personnel.
FD4B Info Cooling fan has been restored to a
normal level.(Location:X,Event:Y)
[Meaning] The cooling fan module at the part shown in X is back to the normal level. Y
shows the event type.
[Action] No particular action required.
FD4C WARNING On switch module, a warning event
occurred.(Location:X,Event:Y)
[Meaning] A warning event in the switch module at the part shown in X is occurred. Y
shows the event type.
[Action] Consult your reseller or maintenance personnel.
FD4D FAIL On switch module, an error event
occurred.(Location:X,Event:Y)
[Meaning] An error event in the switch module at the part shown in X is occurred. Y
shows the event type.
[Action] Consult your reseller or maintenance personnel.
FD4E Info Switch module has been restored to a
normal level.(Location:X,Event:Y)
[Meaning] The switch module at the part shown in X is back to the normal level. Y shows
the event type.
[Action] No particular action required.
FD50 FAIL On disk, an error event occurred.
(Location:X,Event:Y)
[Meaning] An error event in the disk at the part shown in X is occurred. Y shows the
event type.
[Action] Consult your reseller or maintenance personnel.
FD51 Info Disk has been restored to a normal level.
(Location:X,Event:Y)
[Meaning] The disk at the part shown in X is back to the normal level. Y shows the event
type.
[Action] No particular action required.
FD52 WARNING On management module, a warning
event occurred.(Location:X,Event:Y)
HCSM alert log message
A-5
Hitachi Compute Blade 500 Series Management Module Setup Guide