ID Level Message
Description
[Meaning] A warning event in the server blade at the part shown in X is occurred. Y
shows the event type.
[Action] Consult your reseller or maintenance personnel.
FD41 FAIL On server, an error event occurred.
(Location:X,Event:Y)
[Meaning] An error event in the server blade at the part shown in X is occurred. Y shows
the event type.
[Action] Consult your reseller or maintenance personnel.
FD42 Info Server has been restored to a normal
level.(Location:X,Event:Y)
[Meaning] The server blade at the part shown in X is back to the normal level. Y shows
the event type.
[Action] No particular action required.
FD43 WARNING On physical partition, a warning event
occurred.(Location:X,Event:Y)
[Meaning] A warning event in the server blade at the part shown in X is occurred. Y
shows the event type.
[Action] Consult your reseller or maintenance personnel.
FD44 FAIL On physical partition, an error event
occurred.(Location:X,Event:Y)
[Meaning] An error event in the server blade at the part shown in X is occurred. Y shows
the event type.
[Action] Consult your reseller or maintenance personnel.
FD45 Info Physical partition has been restored to a
normal level.(Location:X,Event:Y)
[Meaning] The server blade at the part shown in X is back to the normal level. Y shows
the event type.
[Action] No particular action required.
FD46 WARNING On power supply, a warning event
occurred.(Location:X,Event:Y)
[Meaning] A warning event in the power supply module at the part shown in X is
occurred. Y shows the event type.
[Action] Consult your reseller or maintenance personnel.
FD47 FAIL On power supply, an error event
occurred.(Location:X,Event:Y)
[Meaning] An error event in the power supply module at the part shown in X is occurred.
Y shows the event type.
[Action] Consult your reseller or maintenance personnel.
FD48 Info Power supply has been restored to a
normal level.(Location:X,Event:Y)
A-4
HCSM alert log message
Hitachi Compute Blade 500 Series Management Module Setup Guide
To Next Page
Loading...
