Hitachi PB - Maintenance Work; Setting of Maintenance Mode by Service Personnel

2-1
２. Maintenance work
A screen for use in the maintenance work by a service personnel is described.

2.1 Setting of maintenance mode by service personnel
For the maintenance work by a service personnel, restrictions on use of the following
functions are removed.
●System environment setup
●Adjustment/operational checkout
●Solenoid valve/pump test
●Download

１Select the maintenance in a menu and then select Password protection.









２Input a password “HALB” and press Limitation change.
[Caution] 1. The password “HALB” is a special password to enable the
predetermined screen related to the control of IJP. Do not tell this
password to the customer.
2. Even when the customer sets the password in the functional
restriction, the “HALB” has priority.
Back
Maintenancemenu
Operation
management
CirculationcontrolLogmanagement
Environmentsetup
menu
Manual
Shut
down
Softwaremanagement
Testprint
Password
protection

Excitationupdate
(Nozzletest)


 
Status：ＸＸＸＸＸ
 Afteryouhaveenteredacorrectpassword,youarepermittedto
 Password[]
Back
Passwordprotection
Limitation
change
 

 
 Editmessage/Selectmessage [０]（0:access 1:protect）
 Savemessage [０]（0:access 1:protect）
 Printspecifications [０]（0:access 1:protect）
 changethepasswordprotectionsettingsbelow.
Status：ＸＸＸＸＸ
 Printformat [０]（0:access1:protect）
 Maintenance [０]（0:access 1:protect）