Hitachi PB - Unit Information

2-25

2.9 Unit information
● Indicate the unit Type-Form, Ink type, Ink viscosity coefficient.
● Ink viscosity coefficient can be set in this screen without “Calibration of viscometer”.
１Turn on the power.
２Put it into the Service personnel maintenance mode by using
Password protection.
３Press the Unit information on the second page of the Service
maintenance screen.
Decre-
ment
Back
０９８７６５４３２１
Unitinformation
Incre-
ment


← →
 TYPE-FORM ＰＢ−２６０
 InktypeＪＰ−Ｋ６７
 Serialnumber ＰＢ[９９９９９９９９]
Status：ＸＸＸＸＸ
 Inkviscositycoefficient[ＸＸＸＸ]