Hitachi RPI-4.0FSN4E - Page 241

6 Optional functions
229
6
SMGB0077 rev.0 - 01/2013
Element Optional function
Individual
setting
Settings Condition setting Description
F5
PC-ARF: Automatic reset
temperature for cooling
X
19 19 °C
This function is used to set automatic
temperature reset in FAN/COOL/DRY
modes.
20 20 °C
21-24 (21-24) °C
25
25 °C (factory
setting)
26-28 (26-28) °C
29 29 °C
30 30 °C
PC-ART: Not available – 19-30 Not available –
F6
Automatic reset temperature
for heating
X
17 17 °C
This function is used to set automatic
temperature reset in HEAT mode.
18-20 (18-20) °C
21
21 °C (factory
setting)
25-28 (25-28) °C
29 29 °C
30 30 °C
PC-ART: Not available – 17-30 Not available –
F7
Operation stoppage prevention
by remote control switch
operational error
(5)
X 00
Not activated
function
–
01 Activated function
PC-ART: Not available – 00-01 Not available –
F8
Lock function for operation
mode selection
X
00
Not activated
function
This function is used to prevent
changes to the operating mode.
01
Activated function
(factory setting)
F9
Lock function for temperature
setting
X
00
Not activated
function
This function is used to prevent
changes to the temperature setting.
01
Activated function
(factory setting)
FA
Lock function for fan speed
selection
X
00
Not activated
function
This function is used to prevent
changes to the fan speed.
01
Activated function
(factory setting)
Fb
Lock function for swing louver
operation
X
00
Not activated
function
This function is used to prevent
changes to automatic louver
operations.
01
Activated function
(factory setting)